Boom Accessory - Boom reel
SLIDING ANCHOR PILLARS (TIDAL COMPENSATORS)
Sliding anchor pillars are bolted to walls jetty gantries, etc, permitting the boom to rise and fall with the tidal water level. Supplied complete with an integral buoyancy float that is fitted with a lifting ring. The float is filled with low density cross linked closed cell foam and fitted with universal connector to connect to boom. The steel anchor pillar frame is either hot dipped galvanised or stainless steel. The standard available lengths are 1.5 to 6 metres with attachment lugs for 12 mm bolts. The ends of the anchor pillar is stopped with a bolt across the running channel. Supplied complete with nylon wheeled running system to suit boom.
ANCHOR PILLARS ANGLE BRACKETS
The anchor pillars angle brackets allow the Anchor Pillar to be displaced from the wall at an angle. They are essential when the boom is deployed at an acute angle, and allow the Float to rise and fall without fouling with the wall. Stainless steel or mild steel galvanised. Note: fixing bolts not supplied.
MAGNETIC BOOM CONNECTOR
Allows booms to be fixed to temporary or mobile structures (eg ships, harbour gates). Extremely strong, requiring lever mechanism to release (included).
Universal Flat Plate ASTM Plastic Cleat
Universal connector with galvanised wire bridles to a towing eye. The Tow bridle enables connection to each end of the boom to enable the boom to be towed or attached to a securing point. Available in standard sizes from 400 mm to 900 mm. Sizes over 1m would typically use a reinforced backplate and incorporate a float.
Tow plate 10 cm or 20 cm. The tow plate attaches to the Universal connector on the boom to enable the movement of the boom or to attach to a securing point.
ANCHOR AND BUOYS
Anchoring systems to keep a boom 'on station' are available to suit exact site conditions. Optional beacons and marker buoys with lights.
Contact us on the following details for more information:
Telephone: (+44) 01228 710 205