Oil and Chemical Spill Binder
When oil and chemical spills occur it is necessary to have a fast, effective and universal spill response product.
Most spill response powders are difficult to apply in windy conditions, are dusty and leave behind residues after clean up. Few have the ability to bind liquids and retain them in a semi-solid form.
Use Spill Magnet – an inert powder that will: –
Be extremely fast acting
Swell to absorb 25 times its own volume
Be non-reactive with all chemicals* and oils
Binds liquids together on contact
Not allow the liquid to leach out
Clean to a film free surface
Be non-dusting even in windy conditions
Reduce levels of fuming from aggressive chemicals
Is an innovative product from the Cowen Flowline Spill Response range, specifically formulated to give all of the above properties.
How To Use
Pour a liberal quantity of Spill Magnet around and onto the spilt liquid, or, in front of the liquid if it is flowing. Pour around drain inlets to prevent liquids escaping into them.
Spill Magnet begins to work instantly. However, allow it to absorb the bulk of the liquid for 2 to 5 minutes.
Work the binder into the surface to produce a totally dry, film free result.
Sweep or vacuum up the residue. If any part of the surface remains wet, add a little more Spill Magnet and work again with the broom until the surface is completely dry.
NB Spill Magnet does not neutralise chemical properties of liquids absorbed. Dispose in accordance with the manufacturers data sheet for the chemical spilt.
* Not recommended for use with hydrofluoric (HF) Acid
Substances sorbed by SPILL MAGNET
Cyanides and nitriles
Alcohols and glycols
Phenols and cresols
Alternatively contact us on the following details:
Telephone: (+44) 01228 710 205